Popular Products
Machine Specifications
Equipments
Optionals
| Items | T0632AL |
| Capacity | |
| Swing over bed | Φ330mm |
| Swing over cross slide | Φ198mm |
| Swing in gap dia. | Φ476mm |
| Swing in length | 210mm |
| Center height | 166mm |
| Distance between centers | 1000mm |
| Bed width | 187mm |
| Bed length | 1655mm |
| Bed height | 290mm |
| Spindle | |
| Spindle bore | Φ38mm |
| Spindle nose | D1-4 |
| Spindle Taper | MT-5 |
| Spindle speed | 70-2000rpm |
| Steps of spindle speed | 8 |
| Thread and Feed | |
| Lead screw diameter | 22mm |
| Lead screw pitch | 8T.P.I. or 3mm |
| Feed rod diameter | 19mm |
| Inch thread | Nos.4-56 T.P.I / 34 kinds |
| Metric thread | Nos.0.4-7 M.P / 26 kinds |
| Longitudinal Feeds Range in Inch Lead Screw | Nos.0.002-0.548"/Rev / 32 kinds |
| Longitudinal Feeds Range in Metric Lead Screw | Nos.0.052-1.392mm/Rev / 32 kinds |
| Cross Feeds Range in Inch Lead Screw | Nos.0.007-0.0187"/Rev) / 32 kinds |
| Cross Feeds Range in Metric Lead Screw | Nos.0.014-0.380mm/Rev / 32 kinds |
| Tool | |
| Max. Section of Tool | 16x16mm |
| Width of Cross Slide | 130mm |
| Max. Travel of Cross Slide | 170mm |
| Compound rest width | 80mm |
| Compound rest travel | 95mm |
| Tailstock | |
| Tailstock sleeve diameter | Φ32mm |
| Tailstock sleeve travel | 100mm |
| Tailstock sleeve taper | MT3 |
| Motor | |
| Main motor power | 1.5 kW (2HP) |
| Item 01 | Descriptions |
| 01.01 | 3-Jaw chuck |
| 01.02 | 4-Jaw chuck |
| 01.03 | Steady rest |
| 01.04 | Follow rest |
| 01.05 | Face plate |
| 01.06 | Stand |
| 01.07 | Brake |
| 01.08 | Work lamp |
| 01.09 | Coolant system |
| 01.10 | Dead center |
| 01.11 | Tool box |
| Item 02 | Descriptions |
| 02.01 | 2-axis Digital Read Out |
| 02.02 | 3-axis Digital Read Out |
| 02.03 | Taper turning attachment |
| 02.04 | Living center |
Machine Specifications
| Items | T0632AL |
| Capacity | |
| Swing over bed | Φ330mm |
| Swing over cross slide | Φ198mm |
| Swing in gap dia. | Φ476mm |
| Swing in length | 210mm |
| Center height | 166mm |
| Distance between centers | 1000mm |
| Bed width | 187mm |
| Bed length | 1655mm |
| Bed height | 290mm |
| Spindle | |
| Spindle bore | Φ38mm |
| Spindle nose | D1-4 |
| Spindle Taper | MT-5 |
| Spindle speed | 70-2000rpm |
| Steps of spindle speed | 8 |
| Thread and Feed | |
| Lead screw diameter | 22mm |
| Lead screw pitch | 8T.P.I. or 3mm |
| Feed rod diameter | 19mm |
| Inch thread | Nos.4-56 T.P.I / 34 kinds |
| Metric thread | Nos.0.4-7 M.P / 26 kinds |
| Longitudinal Feeds Range in Inch Lead Screw | Nos.0.002-0.548"/Rev / 32 kinds |
| Longitudinal Feeds Range in Metric Lead Screw | Nos.0.052-1.392mm/Rev / 32 kinds |
| Cross Feeds Range in Inch Lead Screw | Nos.0.007-0.0187"/Rev) / 32 kinds |
| Cross Feeds Range in Metric Lead Screw | Nos.0.014-0.380mm/Rev / 32 kinds |
| Tool | |
| Max. Section of Tool | 16x16mm |
| Width of Cross Slide | 130mm |
| Max. Travel of Cross Slide | 170mm |
| Compound rest width | 80mm |
| Compound rest travel | 95mm |
| Tailstock | |
| Tailstock sleeve diameter | Φ32mm |
| Tailstock sleeve travel | 100mm |
| Tailstock sleeve taper | MT3 |
| Motor | |
| Main motor power | 1.5 kW (2HP) |
Equipments
| Item 01 | Descriptions |
| 01.01 | 3-Jaw chuck |
| 01.02 | 4-Jaw chuck |
| 01.03 | Steady rest |
| 01.04 | Follow rest |
| 01.05 | Face plate |
| 01.06 | Stand |
| 01.07 | Brake |
| 01.08 | Work lamp |
| 01.09 | Coolant system |
| 01.10 | Dead center |
| 01.11 | Tool box |
Optionals
| Item 02 | Descriptions |
| 02.01 | 2-axis Digital Read Out |
| 02.02 | 3-axis Digital Read Out |
| 02.03 | Taper turning attachment |
| 02.04 | Living center |
Products
Download
FORTUNE PACIFIC LIMITED © All Rights Reserved.