FP-400ST Slant bed Turning Center Basic Cast Frame

FP-400ST 45° Slant bed CNC Turning Center Basic Cast Steel, Cast Iron Base Frame is the key cast iron or cast steel component for the manufacture of swing over bed 500mm Inclined bed CNC Turning Center.

FP-400ST 45° Turning Center FrameDownload

INQUIRY

PDF Format

Description

Features

Parameters

Briefs

Technical parameters of FP-400ST 45° Turning Center Base core Assembly Basic Cast Frame

Model		Unit	FP-400ST
Working range	Max. turning diameter over bed	mm	Φ580
	Max. turning swing dia. over carriage	mm	Φ350
	Max. turning diameter	mm	Φ250
	Max. length between both chucks	mm	480	500
	Max. processing length	mm	350	350
Max. X/Z axis travel	X1 /X2 axis	mm	230/230
	Z1/ Z2 axis	mm	400/530
	Max. tailstock travel (Z3 axis)	mm	530
Feed screw	Control axis	mm	7 Axis (X1+X2+ Z1+Z2+Z3+C1+C2)
	X1 /X2 axis ball-screw	mm	3208-C3
	Recommend the X axis motor torque	Nm	≥10
	Z1/ Z2 axis ball-screw		3208-C3
	Recommend the Z1/ Z2 axis motor torque	Nm	≥15
	Tailstock ball-screw (Z3 axis)		3208-C3
	Recommend the Z3 axis motor torque	Nm	≥15
Bed	Bed slant angle		45°
Bed	Linear guide’s span	mm	400
Spindle	Max. Spindle speed	rpm	Main spindle: 4500 Sub-spindle: 4500	Main spindle: 4500 Sub-spindle: 4500
	Spindle through-hole diameter	mm	Main spindle: Φ61 Sub-spindle: Φ56	Main spindle: Φ56 Sub-spindle: Φ56
	Spindle nose size	mm	Main spindle: A2-6 (standard) Sub-spindle: A2-5 (standard)	Main spindle: A2-5 (optional) Sub-spindle: A2-5 (optional)
	Recommend the spindle motor power		Main spindle: 7.5 Sub-spindle: 5.5	Main spindle: 5.5 Sub-spindle: 5.5
	Hydraulic chuck or collet chuck		Main spindle: 8 inch Sub-spindle: 6 inch	Main spindle: 6 inch Sub-spindle: 6 inch

Brief
FP-400ST 45° Slant bed CNC Turning Center Basic Cast Steel, Cast Iron Base Frame is the key cast iron or cast steel component for the manufacture of swing over bed 500mm Inclined bed CNC Turning Center.

Features of FP-400ST 45° Turning Center Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;

Features of FP-400ST 45° Turning Center Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;

Technical parameters of FP-400ST 45° Turning Center Base core Assembly Basic Cast Frame

Model		Unit	FP-400ST
Working range	Max. turning diameter over bed	mm	Φ580
	Max. turning swing dia. over carriage	mm	Φ350
	Max. turning diameter	mm	Φ250
	Max. length between both chucks	mm	480	500
	Max. processing length	mm	350	350
Max. X/Z axis travel	X1 /X2 axis	mm	230/230
	Z1/ Z2 axis	mm	400/530
	Max. tailstock travel (Z3 axis)	mm	530
Feed screw	Control axis	mm	7 Axis (X1+X2+ Z1+Z2+Z3+C1+C2)
	X1 /X2 axis ball-screw	mm	3208-C3
	Recommend the X axis motor torque	Nm	≥10
	Z1/ Z2 axis ball-screw		3208-C3
	Recommend the Z1/ Z2 axis motor torque	Nm	≥15
	Tailstock ball-screw (Z3 axis)		3208-C3
	Recommend the Z3 axis motor torque	Nm	≥15
Bed	Bed slant angle		45°
Bed	Linear guide’s span	mm	400
Spindle	Max. Spindle speed	rpm	Main spindle: 4500 Sub-spindle: 4500	Main spindle: 4500 Sub-spindle: 4500
	Spindle through-hole diameter	mm	Main spindle: Φ61 Sub-spindle: Φ56	Main spindle: Φ56 Sub-spindle: Φ56
	Spindle nose size	mm	Main spindle: A2-6 (standard) Sub-spindle: A2-5 (standard)	Main spindle: A2-5 (optional) Sub-spindle: A2-5 (optional)
	Recommend the spindle motor power		Main spindle: 7.5 Sub-spindle: 5.5	Main spindle: 5.5 Sub-spindle: 5.5
	Hydraulic chuck or collet chuck		Main spindle: 8 inch Sub-spindle: 6 inch	Main spindle: 6 inch Sub-spindle: 6 inch