Technical parameters of FP-630STYY 45° Slant bed Turning Center Cast Steel Basic Frame
Model |
Unit |
FP-630STYY |
Working range |
Max. turning diameter over bed |
mm |
Φ780 |
Max. turing diameter |
mm |
Φ300 |
Max. turning swing dia. over carriage |
mm |
Φ450 |
Φ450 |
Max. length between both chucks |
mm |
850 |
666 |
Max. processing length |
mm |
850 |
650 |
Max. X/Z axis travel |
X1/X2 axis |
mm |
290/290 |
Y1/Y2 axis |
mm |
120/120 |
Z 1/Z2 axis |
mm |
1000/580 |
Max. Tailstock travel |
mm |
1000 |
Feed screw |
Control axis |
mm |
9 Axis
(X1+X2+Y1+Y2+Z1+Z2+Z3+C1+C2) |
X1/X2 axis ball-screw |
mm |
4010-C3 |
Recommend the X axis motor torque |
Nm |
≥15 |
Y1/Y2 axis ball-screw |
|
3208-C3 |
Recommend the Z axis motor torque |
Nm |
≥10 |
Z axis ball-screw |
|
4010-C3 |
Recommend the Z axis motor torque |
Nm |
≥15 |
Tailstock ball-screw |
|
4010-C3 |
Recommend tailstock motor torque |
Nm |
≥15 |
Bed |
Bed slant angle |
|
45° |
Linear guide’s span |
mm |
427 |
Spindle |
Max. Spindle speed |
rpm |
Main spindle: 4500 Sub-spindle: 4500 |
Main spindle: 3000 Sub-spindle: 3000 |
Spindle through-hole diameter |
mm |
Main spindle: Φ62 Sub-spindle: Φ62 |
Main spindle: Φ88 Sub-spindle: Φ88 |
Spindle nose size |
mm |
Main spindle: A2-6 (standard) Sub-spindle: A2-6 (standard) |
Main spindle: A2-8 (optional) Sub-spindle: A2-8 (optional) |
Bore taper |
|
Main spindle: 1:20 Sub-spindle: 1:20 |
Main spindle: 1:20 Sub-spindle: 1:20 |
Recommend the spindle motor power |
|
Main spindle: 7.5 Sub-spindle: 7.5 |
Main spindle: 11 Sub-spindle: 11 |
Hydraulic chuck or collet chuck |
|
Main spindle: 8 inch Sub-spindle: 8 inch |
Main spindle: 10 inch Sub-spindle: 10 inch |
Briefs
FP-630STYY 45° Slant bed Turning Center Basic Cast Steel,Cast Iron Frame is the key cast iron or cast steel component for the manufacture of swing over bed 630mm Slant bed CNC Turning Center.
Features
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;