FP-630SY 45° Slant bed Turning Center Basic Cast Frame

FP-630SY 45° Slant bed Turning Center Cast Steel,Cast Iron Basic Frame is the key cast iron or cast steel component for the manufacture of swing over bed 630mm Slant bed CNC Turning Center.

FP-630SY 45° Turning Center FrameDownload

INQUIRY

PDF Format

Description

Features

Parameters

Usages

Technical parameters of FP-630SY 45° Slant Bed Turning Center Cast Steel Basic Frame

Model		Unit	FP-630SY
Working range	Max. turning diameter over bed	mm	Φ780
	Max. turning diameter	mm	Φ300
	Max. turning swing dia. over carriage	mm	Φ450	Φ450
	Max. length between both chucks	mm	850	666
	Max. processing length	mm	850	650
Max. X/Z axis travel	X2 axis	mm	290
	Y2 axis	mm	120
	Z2 axis	mm	1000
	Max. Tailstock travel	mm	1000
Feed screw	Control axis	mm	6 Axis (X2+Y2+ Z2+Z3+C1+C2)
	X1/X2 axis ball-screw	mm	4010-C3
	Recommend the X axis motor torque	Nm	≥15
	Y1/Y2 axis ball-screw		3208-C3
	Recommend the Z axis motor torque	Nm	≥10
	Z axis ball-screw		4010-C3
	Recommend the Z axis motor torque	Nm	≥15
	Tailstock ball-screw		4010-C3
	Recommend tailstock motor torque	Nm	≥15
Bed	Bed slant angle		45°
Bed	Linear guide’s span	mm	427
Spindle	Max. Spindle speed	rpm	Main spindle: 4500 Sub-spindle: 4500	Main spindle: 3000 Sub-spindle: 3000
	Spindle through-hole diameter	mm	Main spindle: Φ62 Sub-spindle: Φ62	Main spindle: Φ88 Sub-spindle: Φ88
	Spindle nose size	mm	Main spindle: A2-6 (standard) Sub-spindle: A2-6 (standard)	Main spindle: A2-8 (optional) Sub-spindle: A2-8 (optional)
	Bore taper		Main spindle: 1:20 Sub-spindle: 1:20	Main spindle: 1:20 Sub-spindle: 1:20
	Recommend the spindle motor power		Main spindle: 7.5 Sub-spindle: 7.5	Main spindle: 11 Sub-spindle: 11
	Hydraulic chuck or collet chuck		Main spindle: 8 inch Sub-spindle: 8 inch	Main spindle: 10 inch Sub-spindle: 10 inch

Usages
FP-630SY 45° Slant bed Turning Center Frame Cast Steel,Cast Iron Basic Frame is the key cast iron or cast steel component for the manufacture of swing over bed 630mm Slant bed CNC Turning Center.

Features of FP-630SY 45° Slant Bed Turning Center Cast Steel Basic Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;

Features of FP-630SY 45° Slant Bed Turning Center Cast Steel Basic Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;

Technical parameters of FP-630SY 45° Slant Bed Turning Center Cast Steel Basic Frame

Model		Unit	FP-630SY
Working range	Max. turning diameter over bed	mm	Φ780
	Max. turning diameter	mm	Φ300
	Max. turning swing dia. over carriage	mm	Φ450	Φ450
	Max. length between both chucks	mm	850	666
	Max. processing length	mm	850	650
Max. X/Z axis travel	X2 axis	mm	290
	Y2 axis	mm	120
	Z2 axis	mm	1000
	Max. Tailstock travel	mm	1000
Feed screw	Control axis	mm	6 Axis (X2+Y2+ Z2+Z3+C1+C2)
	X1/X2 axis ball-screw	mm	4010-C3
	Recommend the X axis motor torque	Nm	≥15
	Y1/Y2 axis ball-screw		3208-C3
	Recommend the Z axis motor torque	Nm	≥10
	Z axis ball-screw		4010-C3
	Recommend the Z axis motor torque	Nm	≥15
	Tailstock ball-screw		4010-C3
	Recommend tailstock motor torque	Nm	≥15
Bed	Bed slant angle		45°
Bed	Linear guide’s span	mm	427
Spindle	Max. Spindle speed	rpm	Main spindle: 4500 Sub-spindle: 4500	Main spindle: 3000 Sub-spindle: 3000
	Spindle through-hole diameter	mm	Main spindle: Φ62 Sub-spindle: Φ62	Main spindle: Φ88 Sub-spindle: Φ88
	Spindle nose size	mm	Main spindle: A2-6 (standard) Sub-spindle: A2-6 (standard)	Main spindle: A2-8 (optional) Sub-spindle: A2-8 (optional)
	Bore taper		Main spindle: 1:20 Sub-spindle: 1:20	Main spindle: 1:20 Sub-spindle: 1:20
	Recommend the spindle motor power		Main spindle: 7.5 Sub-spindle: 7.5	Main spindle: 11 Sub-spindle: 11
	Hydraulic chuck or collet chuck		Main spindle: 8 inch Sub-spindle: 8 inch	Main spindle: 10 inch Sub-spindle: 10 inch