Technical parameters of CCG8018 Centerless Cylindrical Grinder

Model	Unit	CCG8018
Diameter through grinding	mm	Φ5~80 (0.2-3”)
Max. length through grinding	mm	180 (7.1”)
Cut grinding diameter	mm	Φ5~80 (0.2-3”)
Grinding wheel size	mm	Φ500x150x305 (20x6x12”)
Guide wheel size	mm	Φ300x150x127 (12x6x5”)
Grinding wheel speed	r/min	1300
Guide wheel speed	r/min	10-180
Feed rate of corrector dial per grid	mm	0.01
Working speed of dresser	m/min	0.01-4
Rotary angle of guide wheel (vertical)	°	-2~+4°
Rotary angle of guide wheel (horizontal)	°	-1~+3°
Feed rate of feeding scale per rotation	mm	0.5
Feed rate of feeding scale per grid	mm	0.005
Center height	mm	210 (8”)
Grinding wheel motor power	kW	15
Guide wheel motor power	kW	2.2
Lubrication motor power	kW	0.09
Hydraulic motor power	kW	0.37
Cooling motor power	kW	0.12
Roundness	mm	0.002
Cylindricity	mm	0.003
Roughness	Ra	0.32
Overall dimension (L x W x H)	mm	1940x1670x1500
Net weight	kg	3700

Standard accessories of CCG8018 Centerless Cylindrical Grinder
1. Grinding wheel chuck;
2. Guide wheel chuck;
3. Grinding wheel;
4. Guide wheel;
5. Longitudinal feed carriage;
6. Wheel hook;
7. Grinding wheel balance shaft;
8. Balance block
 
Optional accessories of CCG8018 Centerless Cylindrical Grinder
1. Balancing arbor;
2. Cross feed bracket: 5-15, 15-40, 40-80mm;
3. Electrical magnet valve;
4. Feed Mechanism;

Centerless Grinders
For fast stock removal, lower machine tolerances and size as low as 0.0001″ or better, centerless grinding is the answer. Fortunately, centerless grinding has grown in popularity in the sphere of grinding technology. With centerless grinders, as the name implies, the work is not supported between centers. Instead, it’s held on a blade between the grinding wheel and the regulating wheel, which acts as a brake to set the RPM.

Basically, centerless grinding can be carried out in two different methods:
1) Through-feed
2) In-feed (Plunge cut grinding)
The through-feed method is applicable only when straight cylindrical parts are used. If there’s a head in the work, or the work is of stepped or taper form, the in-feed method would be the best choice. The end-feed method is used for headed components that are too long to be ground by the in-feed method. Generally, the end-feed method is applied when the length of the workpiece is greater than the width of the grinding wheel.

Centerless grinders have many more advantages when compared to center type grinders:
The rate of production is higher in centerless grinding.
The workpiece is provided with better stability
The job is supported along the whole length which prevents the occurrence of deflection. Hence, this process is suitable for long workpieces.
The time required for job setting is eliminated.
Less stock is needed due to the elimination of centering.
Production costs are lower.
Maintenance costs are lower as the wear and tear on the machines is less.
Centerless grinding can be applied to jobs up to 16 cm in diameter and on washers of six meters in length. One advantage of this process is that it allows the grinding of headed, stepped, tapered, and formed jobs through both in-feed and end-feed methods.

Contact FORTUNE PACIFIC to learn more about our centerless grinders. Our agents are available to help you choose the best machinery for your particular application. 

A grinding machine, often shortened to grinder, is any of various power tools or machine tools used for grinding, which is a type of machining using an abrasive wheel as the cutting tool. Each grain of abrasive on the wheel's surface cuts a small chip from the workpiece via shear deformation.

Grinding is used to finish workpieces that must show high surface quality (e.g., low surface roughness) and high accuracy of shape and dimension. As the accuracy in dimensions in grinding is of the order of 0.000025 mm, in most applications it tends to be a finishing operation and removes comparatively little metal, about 0.25 to 0.50 mm depth. However, there are some roughing applications in which grinding removes high volumes of metal quite rapidly. Thus, grinding is a diverse field.

Overview
The grinding machine consists of a bed with a fixture to guide and hold the work piece, and a power-driven grinding wheel spinning at the required speed. The speed is determined by the wheel’s diameter and manufacturer’s rating. The grinding head can travel across a fixed work piece, or the work piece can be moved while the grind head stays in a fixed position.

Fine control of the grinding head or table position is possible using a vernier calibrated hand wheel, or using the features of numerical controls.

Grinding machines remove material from the work piece by abrasion, which can generate substantial amounts of heat. To cool the work piece so that it does not overheat and go outside its tolerance, grinding machines incorporate a coolant. The coolant also benefits the machinist as the heat generated may cause burns. In high-precision grinding machines (most cylindrical and surface grinders), the final grinding stages are usually set up so that they remove about 200 nm (less than 1/10000 in) per pass - this generates so little heat that even with no coolant, the temperature rise is negligible

Standard accessories of CCG8018 Centerless Cylindrical Grinder
1. Grinding wheel chuck;
2. Guide wheel chuck;
3. Grinding wheel;
4. Guide wheel;
5. Longitudinal feed carriage;
6. Wheel hook;
7. Grinding wheel balance shaft;
8. Balance block

Technical parameters of CCG8018 Centerless Cylindrical Grinder

Model	Unit	CCG8018
Diameter through grinding	mm	Φ5~80 (0.2-3”)
Max. length through grinding	mm	180 (7.1”)
Cut grinding diameter	mm	Φ5~80 (0.2-3”)
Grinding wheel size	mm	Φ500x150x305 (20x6x12”)
Guide wheel size	mm	Φ300x150x127 (12x6x5”)
Grinding wheel speed	r/min	1300
Guide wheel speed	r/min	10-180
Feed rate of corrector dial per grid	mm	0.01
Working speed of dresser	m/min	0.01-4
Rotary angle of guide wheel (vertical)	°	-2~+4°
Rotary angle of guide wheel (horizontal)	°	-1~+3°
Feed rate of feeding scale per rotation	mm	0.5
Feed rate of feeding scale per grid	mm	0.005
Center height	mm	210 (8”)
Grinding wheel motor power	kW	15
Guide wheel motor power	kW	2.2
Lubrication motor power	kW	0.09
Hydraulic motor power	kW	0.37
Cooling motor power	kW	0.12
Roundness	mm	0.002
Cylindricity	mm	0.003
Roughness	Ra	0.32
Overall dimension (L x W x H)	mm	1940x1670x1500
Net weight	kg	3700

Optional accessories of CCG8018 Centerless Cylindrical Grinder
1. Balancing arbor;
2. Cross feed bracket: 5-15, 15-40, 40-80mm;
3. Electrical magnet valve;
4. Feed Mechanism;