FP-500ST Slant bed CNC Turning Center Basic Cast Frame

FP-500ST 45° Slant bed CNC Turning Center Basic Cast Steel, Cast Iron Base Frame is the key cast iron or cast steel component for the manufacture of swing over bed 500mm Inclined bed CNC Turning Center.

FP-500ST 45° Turning Center FrameDownload

INQUIRY

PDF Format

Description

Features

Parameters

Briefs

Technical parameters of FP-500ST 45° Turning Center Basic core Assembly Base Frame

Model		Unit	FP-500ST
Working range	Max. turning diameter over bed	mm	Φ680
	Max. turning swing dia. over carriage	mm	Φ400
	Max. turning diameter	mm	Φ250
	Max. length between both chucks	mm	560	580
	Max. processing length	mm	540	560
Max. X/Z axis travel	X2 X4 axis	mm	230/160
	Z2/ Z4 axis	mm	570/570
	Max. tailstock travel	mm	570
Feed screw	Control axis	mm	7 Axis (X2+X4+ Z2+Z4+Z5+C1+C2)
	X2 X4 axis ball-screw	mm	3210-C3
	Recommend the X axis motor torque	Nm	≥10
	Z2/ Z4 axis ball-screw		4010-C3
	Recommend the Z axis motor torque	Nm	≥15
	Z5 axis ball-screw		4010-C3
	Recommend the Z5 axis motor torque	Nm	≥15
Bed	Bed slant angle		45°
Bed	Linear guide’s span	mm	400
Spindle	Max. Spindle speed	rpm	Main spindle: 3000 Sub-spindle: 4500	Main spindle: 4500 Sub-spindle: 4500
	Spindle through-hole diameter	mm	Main spindle: Φ79 Sub-spindle: Φ61	Main spindle: Φ61 Sub-spindle: Φ61
	Spindle nose size	mm	Main spindle: A2-6 (standard) Sub-spindle: A2-6 (standard)	Main spindle: A2-6 (optional) Sub-spindle: A2-6 (optional)
	Recommend the spindle motor power		Main spindle: 11 Sub-spindle: 7.5	Main spindle: 7.5 Sub-spindle: 7.5
	Hydraulic chuck or collet chuck		Main spindle: 10 inch Sub-spindle: 8 inch	Main spindle: 8 inch Sub-spindle: 8 inch

Briefs
FP-500ST 45° Slant bed CNC Turning Center Basic Cast Steel, Cast Iron Base Frame is the key cast iron or cast steel component for the manufacture of swing over bed 500mm Inclined bed CNC Turning Center.

Features of FP-500ST 45° Turning Center Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;

Features of FP-500ST 45° Turning Center Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;

Technical parameters of FP-500ST 45° Turning Center Basic core Assembly Base Frame

Model		Unit	FP-500ST
Working range	Max. turning diameter over bed	mm	Φ680
	Max. turning swing dia. over carriage	mm	Φ400
	Max. turning diameter	mm	Φ250
	Max. length between both chucks	mm	560	580
	Max. processing length	mm	540	560
Max. X/Z axis travel	X2 X4 axis	mm	230/160
	Z2/ Z4 axis	mm	570/570
	Max. tailstock travel	mm	570
Feed screw	Control axis	mm	7 Axis (X2+X4+ Z2+Z4+Z5+C1+C2)
	X2 X4 axis ball-screw	mm	3210-C3
	Recommend the X axis motor torque	Nm	≥10
	Z2/ Z4 axis ball-screw		4010-C3
	Recommend the Z axis motor torque	Nm	≥15
	Z5 axis ball-screw		4010-C3
	Recommend the Z5 axis motor torque	Nm	≥15
Bed	Bed slant angle		45°
Bed	Linear guide’s span	mm	400
Spindle	Max. Spindle speed	rpm	Main spindle: 3000 Sub-spindle: 4500	Main spindle: 4500 Sub-spindle: 4500
	Spindle through-hole diameter	mm	Main spindle: Φ79 Sub-spindle: Φ61	Main spindle: Φ61 Sub-spindle: Φ61
	Spindle nose size	mm	Main spindle: A2-6 (standard) Sub-spindle: A2-6 (standard)	Main spindle: A2-6 (optional) Sub-spindle: A2-6 (optional)
	Recommend the spindle motor power		Main spindle: 11 Sub-spindle: 7.5	Main spindle: 7.5 Sub-spindle: 7.5
	Hydraulic chuck or collet chuck		Main spindle: 10 inch Sub-spindle: 8 inch	Main spindle: 8 inch Sub-spindle: 8 inch