Popular Products
NC630 NC800 NC1000 NC1200 W550 3tons Turn CNC
NC630 NC800 NC1000 NC1200 W550 3tons Turn CNC with FANUC 0i TF control system, linear and circular interpolation. Longitudinal and cross feed adopts AC servo motor, pulse encoder feedback.
- NC630 NC800 NC1000 NC1200 W550 3tons Turning CNC LatheDownload
Technical Specifications of NC630 NC800 NC1000 NC1200 W550 3tons Turning CNC Lathe
Standard accessories
1. 3-jaw chuck: 325mm;
2. Center and center sleeve;
3. 4-station vertical electric tool post;
4. Steady rest: 100-300mm;
5. Work light;
6. Coolant system;
7. Automatic lubrication system;
8. Heat exchanger;
Optional accessories
1. 6-position horizontal electric tool post;
2. Hydraulic solid chuck and tailstock;
3. Follow rest;
Features
1. FANUC 0i TF control system, linear and circular interpolation.
2. Longitudinal and cross feed adopts AC servo motor, pulse encoder feedback.
3. Turning CNC Lathe bed guideway adopts high-strength castings after supersonic frequency quenching and precise grinding.
4. CNC Lathe with wide processing range including turning cylindrical, inner hole, end face, groove, conical surface, chamfering, circular cone, cylindrical threading and circular arc camber.
Use
CNC Engineering Lathe is suitable to process all kinds of small and middle-sized shaft and plate work piece, and could also turn various threads, circle arc, circular cone, inside and outside surface of revolved body. CNC Engineering Lathe is widely used in sanitary, valve, electrical appliance, instrument, automobile, motorcycle, bearings and so on.
| Model | NC630 | NC800 | NC1000 | NC1200 |
|---|---|---|---|---|
| Type | W550 | W550 | W550 | W550 |
| CNC system | FANUC 0i TF | |||
| Swing over bed | Ø630mm (25'') | Ø800mm (31.5'') | Ø1000mm (39'') | Ø1200mm (47'') |
| Swing over cross slide | Ø315mm (12'') | Ø450mm (18'') | Ø650mm (26'') | Ø850mm (33'') |
| Max. length of workpiece | 1000-12000mm (39''-472'') | |||
| Max. weight of workpiece | 3000kg | |||
| Bed width | 550mm (22'') | |||
| Spindle bore diameter | Ø105mm | Ø105mm (optional: Ø130mm) | ||
| Spindle speed step | Stepless, 14-60, 60-210, 210-750rpm | |||
| No of tool post | Vertical 4-position | |||
| Longitudinal travel of tool post | 1000-12000mm (39''-472'') | |||
| Cross travel of tool post | 350mm (14’’) | 450mm (18’’) | ||
| Longitudinal rapid travel speed | 6000mm/min | |||
| Cross rapid travel speed | 3000mm/min | |||
| Longitudinal feed resolution | 0.01mm | |||
| Cross feed resolution | 0.005mm | |||
| Positioning accuracy longitudinal/cross | 0.03/500mm, 0.05/2000mm / 0.02mm | |||
| Repositioning accuracy longitudinal/cross | 0.013/500mm, 0.025/2000mm / 0.01mm | |||
| Repositioning accuracy of tool post | 0.005mm | |||
| Main motor power | 11kW | |||
1. 3-jaw chuck: 325mm;
2. Center and center sleeve;
3. 4-station vertical electric tool post;
4. Steady rest: 100-300mm;
5. Work light;
6. Coolant system;
7. Automatic lubrication system;
8. Heat exchanger;
Optional accessories
1. 6-position horizontal electric tool post;
2. Hydraulic solid chuck and tailstock;
3. Follow rest;
Features
1. FANUC 0i TF control system, linear and circular interpolation.
2. Longitudinal and cross feed adopts AC servo motor, pulse encoder feedback.
3. Turning CNC Lathe bed guideway adopts high-strength castings after supersonic frequency quenching and precise grinding.
4. CNC Lathe with wide processing range including turning cylindrical, inner hole, end face, groove, conical surface, chamfering, circular cone, cylindrical threading and circular arc camber.
Use
CNC Engineering Lathe is suitable to process all kinds of small and middle-sized shaft and plate work piece, and could also turn various threads, circle arc, circular cone, inside and outside surface of revolved body. CNC Engineering Lathe is widely used in sanitary, valve, electrical appliance, instrument, automobile, motorcycle, bearings and so on.
Standard accessories
1. 3-jaw chuck: 325mm;
2. Center and center sleeve;
3. 4-station vertical electric tool post;
4. Steady rest: 100-300mm;
5. Work light;
6. Coolant system;
7. Automatic lubrication system;
8. Heat exchanger;
1. 3-jaw chuck: 325mm;
2. Center and center sleeve;
3. 4-station vertical electric tool post;
4. Steady rest: 100-300mm;
5. Work light;
6. Coolant system;
7. Automatic lubrication system;
8. Heat exchanger;
Technical Specifications of NC630 NC800 NC1000 NC1200 W550 3tons Turning CNC Lathe
| Model | NC630 | NC800 | NC1000 | NC1200 |
|---|---|---|---|---|
| Type | W550 | W550 | W550 | W550 |
| CNC system | FANUC 0i TF | |||
| Swing over bed | Ø630mm (25'') | Ø800mm (31.5'') | Ø1000mm (39'') | Ø1200mm (47'') |
| Swing over cross slide | Ø315mm (12'') | Ø450mm (18'') | Ø650mm (26'') | Ø850mm (33'') |
| Max. length of workpiece | 1000-12000mm (39''-472'') | |||
| Max. weight of workpiece | 3000kg | |||
| Bed width | 550mm (22'') | |||
| Spindle bore diameter | Ø105mm | Ø105mm (optional: Ø130mm) | ||
| Spindle speed step | Stepless, 14-60, 60-210, 210-750rpm | |||
| No of tool post | Vertical 4-position | |||
| Longitudinal travel of tool post | 1000-12000mm (39''-472'') | |||
| Cross travel of tool post | 350mm (14’’) | 450mm (18’’) | ||
| Longitudinal rapid travel speed | 6000mm/min | |||
| Cross rapid travel speed | 3000mm/min | |||
| Longitudinal feed resolution | 0.01mm | |||
| Cross feed resolution | 0.005mm | |||
| Positioning accuracy longitudinal/cross | 0.03/500mm, 0.05/2000mm / 0.02mm | |||
| Repositioning accuracy longitudinal/cross | 0.013/500mm, 0.025/2000mm / 0.01mm | |||
| Repositioning accuracy of tool post | 0.005mm | |||
| Main motor power | 11kW | |||
Optional accessories
1. 6-position horizontal electric tool post;
2. Hydraulic solid chuck and tailstock;
3. Follow rest;
1. 6-position horizontal electric tool post;
2. Hydraulic solid chuck and tailstock;
3. Follow rest;
Products
Download
FORTUNE PACIFIC LIMITED © All Rights Reserved.