Popular Products
Technical parameters of NC1250 B755 B970 6tons 8tons 10tons 18tons CNC Metal Lathe
Features
1. One-piece CNC type Engine Lathe bed design for high stiffness. Guideways are induction heat treated and precisely ground for wear-resistance;
2. Main spindle is supported by three points with imported high precision bearings to get high accuracy and high stiffness. NC1250 B755 B970 Engine Lathe CNC type is easy to operate and reliable;
3. Imported high precision ball screws of NC1250 B755 B970 CNC type Engine Lathe are adopted to guarantee the high positioning accuracy of each axis;
4. Reliable CNC system and imported German or Italian tool post is installed to avoid unnecessary trouble;
5. Operation panel equips hand wheel (MPG, manual pulse generator) for easy operation;
6. Forced lubrication system is equipped for CNC type Engine Lathe guideway.
Standard accessories
1. 4-Jaw chuck;
2. Dead center;
3. 4 Stations tool post;
4. Work light;
5. Coolant system;
6. Foundation blocks and anchor bolts;
Optional accessories
1. SIEMENS; GSK 980TD; FAGOR;
2. 8 or 12 Stations electric tool post;
3. Steady rest;
4. Follow rest:
5. Living center;
6. Carrier Roller;
Use
NC1250 B755 B970 6tons 8tons 10tons 18tons CNC Common Lathe is suitable to process all kinds of small and middle-sized shaft and plate work piece, and could also turn various threads, circle arc, circular cone, inside and outside surface of revolved body. NC1250 B755 B970 6tons 8tons 10tons 18tons CNC Common Lathe is widely used in sanitary, valve, electrical appliance, instrument, automobile, motorcycle, bearings and so on.
| Model | Unit | NC1250 | |
|---|---|---|---|
| Type | B755 | B970 | |
| CNC system | FANUC 0i TF | FANUC 0i TF | |
| Max. swing over bed | mm (in) | Φ1250 (50’’) | Φ1250 (50’’) |
| Max. swing over carriage | mm (in) | 900 (36’’) | 880 (35’’) |
| Max. turning length | mm (in) | 1500~12000 (60’’~472’’) | 5000~12000 (197’’~472’’) |
| Max. weight between centers | kg | 6000; 8000; 10000 | 18000 |
| Width of bed | mm (in) | 755 (30’’) | 970 (39’’) |
| Spindle nose | ISO | A2-15 | A2-15 |
| Diameter of spindle in front bearing | mm (in) | 200(8’’) | 240(9.6’’); 280(11.2’’) |
| Spindle bore diameter | mm (in) | Φ130 (5.2’’); Φ100 (4’’) | Φ100 (4’’) |
| Taper of spindle bore | Metric 140 | Metric 140 | |
| Spindle speed range | r/min | 4 steps; 4~630 | 4 steps: 2~200 |
| Longitudinal servo motor torque | Nm | 38/41 | 38/41 |
| Cross servo motor torque | Nm | 30/40 | 38/41 |
| Section dimension of tool shank | mm (in) | 45x45 (1.8’’x1.8’’) | 45x45 (1.8’’x1.8’’); 32x32 (1.3’’x1.3’’) |
| Number of tool post | Vertical: 4 (horizontal: 8/12) | Vertical: 4 (horizontal: 8/12) | |
| Travel of cross slide | mm | 610; 740; 850 | 740; 850; 950 |
| Longitudinal feed speed | mm/min | 1~2000 | 1~2000 |
| Cross feed speed | mm/min | 1~2000 | 1~2000 |
| Longitudinal rapid travel speed | mm/min | 6000 | 6000 |
| Cross rapid travel speed | mm/min | 4000 | 4000 |
| Diameter of tailstock sleeve | mm (in) | 160(6.4’’); 200 (8’’) | 240(906’’); 280(11’’) |
| Travel of tailstock sleeve | mm (in) | 300 (12’’) | 300 (12’’) |
| Taper of tailstock sleeve | Metric 80; MT-6 | Metric 80 | |
| Main motor power | kW | 22/30~40 (servo) | 49/55 |
| Weight of the lathe with 3m | kg | 12900 | 16000 |
| Additional weight per 1m | kg | 800 | 1300 |
| Overall dimension (L x W x H) (3m) | mm | 6100x2000x2100 | 7040x1900x2030 |
Features
1. One-piece CNC type Engine Lathe bed design for high stiffness. Guideways are induction heat treated and precisely ground for wear-resistance;
2. Main spindle is supported by three points with imported high precision bearings to get high accuracy and high stiffness. NC1250 B755 B970 Engine Lathe CNC type is easy to operate and reliable;
3. Imported high precision ball screws of NC1250 B755 B970 CNC type Engine Lathe are adopted to guarantee the high positioning accuracy of each axis;
4. Reliable CNC system and imported German or Italian tool post is installed to avoid unnecessary trouble;
5. Operation panel equips hand wheel (MPG, manual pulse generator) for easy operation;
6. Forced lubrication system is equipped for CNC type Engine Lathe guideway.
Standard accessories
1. 4-Jaw chuck;
2. Dead center;
3. 4 Stations tool post;
4. Work light;
5. Coolant system;
6. Foundation blocks and anchor bolts;
Optional accessories
1. SIEMENS; GSK 980TD; FAGOR;
2. 8 or 12 Stations electric tool post;
3. Steady rest;
4. Follow rest:
5. Living center;
6. Carrier Roller;
Use
NC1250 B755 B970 6tons 8tons 10tons 18tons CNC Common Lathe is suitable to process all kinds of small and middle-sized shaft and plate work piece, and could also turn various threads, circle arc, circular cone, inside and outside surface of revolved body. NC1250 B755 B970 6tons 8tons 10tons 18tons CNC Common Lathe is widely used in sanitary, valve, electrical appliance, instrument, automobile, motorcycle, bearings and so on.
Features
1. One-piece CNC type Engine Lathe bed design for high stiffness. Guideways are induction heat treated and precisely ground for wear-resistance;
2. Main spindle is supported by three points with imported high precision bearings to get high accuracy and high stiffness. NC1250 B755 B970 Engine Lathe CNC type is easy to operate and reliable;
3. Imported high precision ball screws of NC1250 B755 B970 CNC type Engine Lathe are adopted to guarantee the high positioning accuracy of each axis;
4. Reliable CNC system and imported German or Italian tool post is installed to avoid unnecessary trouble;
5. Operation panel equips hand wheel (MPG, manual pulse generator) for easy operation;
6. Forced lubrication system is equipped for CNC type Engine Lathe guideway.
1. One-piece CNC type Engine Lathe bed design for high stiffness. Guideways are induction heat treated and precisely ground for wear-resistance;
2. Main spindle is supported by three points with imported high precision bearings to get high accuracy and high stiffness. NC1250 B755 B970 Engine Lathe CNC type is easy to operate and reliable;
3. Imported high precision ball screws of NC1250 B755 B970 CNC type Engine Lathe are adopted to guarantee the high positioning accuracy of each axis;
4. Reliable CNC system and imported German or Italian tool post is installed to avoid unnecessary trouble;
5. Operation panel equips hand wheel (MPG, manual pulse generator) for easy operation;
6. Forced lubrication system is equipped for CNC type Engine Lathe guideway.
Technical parameters of NC1250 B755 B970 6tons 8tons 10tons 18tons CNC Metal Lathe
| Model | Unit | NC1250 | |
|---|---|---|---|
| Type | B755 | B970 | |
| CNC system | FANUC 0i TF | FANUC 0i TF | |
| Max. swing over bed | mm (in) | Φ1250 (50’’) | Φ1250 (50’’) |
| Max. swing over carriage | mm (in) | 900 (36’’) | 880 (35’’) |
| Max. turning length | mm (in) | 1500~12000 (60’’~472’’) | 5000~12000 (197’’~472’’) |
| Max. weight between centers | kg | 6000; 8000; 10000 | 18000 |
| Width of bed | mm (in) | 755 (30’’) | 970 (39’’) |
| Spindle nose | ISO | A2-15 | A2-15 |
| Diameter of spindle in front bearing | mm (in) | 200(8’’) | 240(9.6’’); 280(11.2’’) |
| Spindle bore diameter | mm (in) | Φ130 (5.2’’); Φ100 (4’’) | Φ100 (4’’) |
| Taper of spindle bore | Metric 140 | Metric 140 | |
| Spindle speed range | r/min | 4 steps; 4~630 | 4 steps: 2~200 |
| Longitudinal servo motor torque | Nm | 38/41 | 38/41 |
| Cross servo motor torque | Nm | 30/40 | 38/41 |
| Section dimension of tool shank | mm (in) | 45x45 (1.8’’x1.8’’) | 45x45 (1.8’’x1.8’’); 32x32 (1.3’’x1.3’’) |
| Number of tool post | Vertical: 4 (horizontal: 8/12) | Vertical: 4 (horizontal: 8/12) | |
| Travel of cross slide | mm | 610; 740; 850 | 740; 850; 950 |
| Longitudinal feed speed | mm/min | 1~2000 | 1~2000 |
| Cross feed speed | mm/min | 1~2000 | 1~2000 |
| Longitudinal rapid travel speed | mm/min | 6000 | 6000 |
| Cross rapid travel speed | mm/min | 4000 | 4000 |
| Diameter of tailstock sleeve | mm (in) | 160(6.4’’); 200 (8’’) | 240(906’’); 280(11’’) |
| Travel of tailstock sleeve | mm (in) | 300 (12’’) | 300 (12’’) |
| Taper of tailstock sleeve | Metric 80; MT-6 | Metric 80 | |
| Main motor power | kW | 22/30~40 (servo) | 49/55 |
| Weight of the lathe with 3m | kg | 12900 | 16000 |
| Additional weight per 1m | kg | 800 | 1300 |
| Overall dimension (L x W x H) (3m) | mm | 6100x2000x2100 | 7040x1900x2030 |
Standard accessories
1. 4-Jaw chuck;
2. Dead center;
3. 4 Stations tool post;
4. Work light;
5. Coolant system;
6. Foundation blocks and anchor bolts;
Optional accessories
1. SIEMENS; GSK 980TD; FAGOR;
2. 8 or 12 Stations electric tool post;
3. Steady rest;
4. Follow rest:
5. Living center;
6. Carrier Roller;
1. 4-Jaw chuck;
2. Dead center;
3. 4 Stations tool post;
4. Work light;
5. Coolant system;
6. Foundation blocks and anchor bolts;
Optional accessories
1. SIEMENS; GSK 980TD; FAGOR;
2. 8 or 12 Stations electric tool post;
3. Steady rest;
4. Follow rest:
5. Living center;
6. Carrier Roller;
Products
Download
FORTUNE PACIFIC LIMITED © All Rights Reserved.
Knee Type Milling Machine: Precision Versatility for Industrial Manufacturing
What is a Knee Type Milling Machine?
A knee type milling machine is a fundamental machine tool distinguished by its vertically adjustable worktable mounted on a "knee" casting. This knee moves precisely up and down a fixed column via a screw mechanism, enabling accurate Z-axis positioning crucial for diverse milling operations.
Working Principle
The core principle involves a rotating milling cutter removing material from a workpiece secured to the table. The adjustable knee mechanism allows controlled vertical movement (Z-axis), while the table provides longitudinal (X-axis) and transverse (Y-axis) travel. This 3-axis control facilitates complex machining of flat, angular, and contoured surfaces.
Key Applications
- Tool & Die Making: Precision molds, jigs, fixtures
- Prototyping: Rapid part development
- Maintenance Shops: Equipment repair & part fabrication
- General Machining: Slotting, drilling, facing, keyway cutting
- Aerospace & Automotive: Component manufacturing
Distinctive Features & Advantages
- Vertical Adjustability: Knee movement enables quick workpiece height changes
- Rigid Construction: Robust cast iron frame ensures stability
- Manual & CNC Options: Traditional control or computer numerical precision
- Turret Design (Common): Swiveling milling head for multi-angle machining
- Wide Workpiece Compatibility: Handles various sizes and shapes
Primary Classifications
- Vertical Knee Mill: Spindle axis perpendicular to table (most common)
- Horizontal Knee Mill: Spindle axis parallel to table (for heavy stock removal)
- Universal Knee Mill: Table swivels for complex angular cuts
- Turret Mill: Head rotates on turret for flexible positioning
Main Components
- Base & Column: Primary support structure
- Knee: Vertically moving saddle supporting the table
- Saddle & Table: Hold and position the workpiece (X/Y axes)
- Milling Head: Houses spindle, motor, and quill (Z-axis)
- Arbor/Spindle: Rotating shaft holding cutting tools
- Controls: Manual handwheels or CNC interface
Evolution & Industry Significance
Since their development in the late 19th century, knee-and-column mills revolutionized machining. The iconic Bridgeport design (1938) popularized the turret style. While CNC machining centers dominate high-volume production, knee mills remain indispensable for flexibility, ease of use, and cost-effectiveness in job shops, schools, and repair facilities worldwide.
Fortune Pacific: Your Knee Mill Solution
At Fortune Pacific, we engineer durable, high-precision knee type milling machines for demanding applications. Explore our range of vertical mills, horizontal mills, and CNC-ready models designed to enhance your workshop's capabilities. Discover the ideal machine for your metalworking, prototyping, or toolmaking needs.
Keywords: Knee Type Milling Machine, Vertical Milling Machine, Horizontal Mill, Turret Mill, Knee-and-Column Mill, Milling Machine for Sale, Industrial Milling, Metalworking Equipment, Workshop Machinery, CNC Mill, Toolroom Mill, Precision Machining, Fortune Pacific, Machine Tool Manufacturer.