Parameters of SGV800H Vertical Spindle Rotary table Surface Grinder

Model	Unit	SGV800H
Max. size of workpiece (dia. x height)	mm	Φ800x300
Max. swiveling diameter of worktable	mm	Φ800
Worktable speed	r/min	13; 20
Travel distance of worktable	mm	450
Travel speed of worktable	m/min	4
Size of grinding wheel (L x W x H)	mm	450x380x150 (cylindrical wheel)  80X25X150 (segmental wheel)
Rapid travel speed of grinding head	m/min	0.22
Wheel head travel per revolution of hand wheel	mm	0.5
Wheel head travel per rev. of dial	mm	2.5
Wheel head travel per division of dial	mm	0.01
Grinding head motor power	kW	25
Grinding head elevator power	kW	0.75
Travel motor power of worktable	kW	0.75
Rotary motor power of worktable	kW	2.2/2.8
Total power of machine	kW	30
Net weight (main engine)	kg	6500

Vertical Spindle Rotary Table Surface Grinders 

Vertical-spindle (wheel-face) grinders
The face of a wheel (cup, cylinder, disc, or segmental wheel) is used on the flat surface. Wheel-face grinding is often used for fast material removal, but some machines can accomplish high-precision work. The workpiece is held on a reciprocating table, which can be varied according to the task, or a rotary-table machine, with continuous or indexed rotation. Indexing allows loading or unloading one station while grinding operations are being performed on another.

Vertical Spindle Reciprocating Grinders
Precision Grinding maintains several Vertical Spindle reciprocating Grinders that can handle extremely long parts or many parts at a time. These grinding machines can handle extremely long parts, up to 220″ long. They can also handle many parts at a time, which allows us to provide excellent pricing for large quantity runs. All of these machines produce high accuracy and are especially suited for grinding long steel bars – 4140, A36, HR Steel Bar, and tool steel bar.

Abstract
SGV800H Vertical Spindle Rotary Table Surface Grinder is often thought of as exclusively a roughing operation. While the process is a common first operation on a casting, forging, or weldment, it is also used for fine finishing applications that demand close control of flatness and surface finish. Because the abrasive wheel3 on those machines are nearly always wider than the work, they are not mounted on cross slides or other devices for the purpose of traversing the wheel across the work. The elimination of those mechanisms contributes to the accuracy of the machine tool.

Process Characteristics
Vertical-Spindle Surface Grinding
Vertical-spindle surface grinding is often thought of as exclusively a
roughing operation. While the process is a common first operation on a casting, forging, or weldment, it is also used for fine finishing applications that demand close control of flatness and surface finish. Because the abrasive wheeP on those machines are nearly always wider than the work, they are not mounted on cross slides or other devices for the purpose of traversing the wheel across the work. The elimination of those mechanisms contributes to the accuracy of the machine tool.
Grinders of that type usually are equipped with wheel drive motors,
which seem to have very high horsepower ratings when compared with other types of grinders. That is because the machines are designed to cut using the entire end surface of the abrasive. The large area of that abrasive face requires a high power wheel drive, even though the cutting forces per unit of area are no higher than in other grinding processes.

Flatness
One unique characteristic of vertical-spindle surface grinding is that the geometry of the work, i.e., its flatness, is generated by the wheel surface and does not rely on a shape that is formed into the wheel by a diamond or other dressing device. That means that, assuming the wheel is properly chosen for the work being done, flatness is not lost as the wheel wears. If the wheel dulls abnormally, forces can be generated that will alter the machine geometry and flatness will be lost, just as on other types of surface grinders.
Surface Finish
Vertical-spindle surface grinding leaves the workpiece with a characteristic cross-hatched pattern on the finished surface. The depth of that pattern is a function of wheel selection, feedrate, sparkout time, and work material. Finishes as good as 1 or 2 microinches RMS can be obtained if proper attention is paid to all of those variables.
Individual abrasive grains leave very long scratches on surfaces produced by vertical spindle surface grinding. That may be viewed as a process flaw or as an advantage depending on the end use or purpose of the ground surface. Fig. 9.2 illustrates the characteristic pattern resulting from vertical-spindle surface grinding. 

Abstract
SGV800H Vertical Spindle Rotary Table Surface Grinder is often thought of as exclusively a roughing operation. While the process is a common first operation on a casting, forging, or weldment, it is also used for fine finishing applications that demand close control of flatness and surface finish. Because the abrasive wheel3 on those machines are nearly always wider than the work, they are not mounted on cross slides or other devices for the purpose of traversing the wheel across the work. The elimination of those mechanisms contributes to the accuracy of the machine tool.

Parameters of SGV800H Vertical Spindle Rotary table Surface Grinder

Model	Unit	SGV800H
Max. size of workpiece (dia. x height)	mm	Φ800x300
Max. swiveling diameter of worktable	mm	Φ800
Worktable speed	r/min	13; 20
Travel distance of worktable	mm	450
Travel speed of worktable	m/min	4
Size of grinding wheel (L x W x H)	mm	450x380x150 (cylindrical wheel)  80X25X150 (segmental wheel)
Rapid travel speed of grinding head	m/min	0.22
Wheel head travel per revolution of hand wheel	mm	0.5
Wheel head travel per rev. of dial	mm	2.5
Wheel head travel per division of dial	mm	0.01
Grinding head motor power	kW	25
Grinding head elevator power	kW	0.75
Travel motor power of worktable	kW	0.75
Rotary motor power of worktable	kW	2.2/2.8
Total power of machine	kW	30
Net weight (main engine)	kg	6500

Flatness
One unique characteristic of vertical-spindle surface grinding is that the geometry of the work, i.e., its flatness, is generated by the wheel surface and does not rely on a shape that is formed into the wheel by a diamond or other dressing device. That means that, assuming the wheel is properly chosen for the work being done, flatness is not lost as the wheel wears. If the wheel dulls abnormally, forces can be generated that will alter the machine geometry and flatness will be lost, just as on other types of surface grinders.