Machine specifications
Items |
TL6240 |
TL6240C |
Capacity |
Max. swing dia. over bed |
Φ400 mm |
Max. swing dia. over slide |
Φ200 mm |
Max. swing dia. over gap |
Φ630 mm |
Effective length in gap |
240 mm |
Max. workpiece length |
1000/1500/2000/3000 mm |
Max. turning length |
950 /1450/1950/2950 mm |
Bed width |
390 mm |
Spindle |
Spindle bore diameter |
Φ52 mm |
Φ105 mm |
Taper of spindle bore |
MT-6 |
Φ113, 1:20 |
Type of spindle nose |
C6 |
D8 |
Spindle speed |
9-1600 rpm |
36-1600 |
Spindle speed steps。 |
24 |
12 |
Feeds and threads |
Max. travel of upper tool post |
145 mm |
Max. travel of lower tool post |
320 mm |
Tool section |
25x25 mm |
Crosswise quick moving speed |
50Hz: 1.9 m/min; 60Hz: 2.3 m/min |
Longitudinal quick moving speed |
50Hz: 4.5 m/min; 60Hz: 5.4 m/min |
Cross feeds range |
0.012-2.73 mm/r; 93kinds |
0.027-1.07 mm/r; 65kinds |
Longitudinal feeds range |
0.028-6.43 mm/r; 93kinds |
0.63-2.52 mm/r; 65kinds |
Metric threads |
0.5-224 mm; 48kinds |
1-14 mm; 22kinds |
Inch threads |
72-1/8TPI; 46kinds |
28-2TPI; 25kinds |
Module threads |
0.5-112 mm; 42kinds |
0.5-7 mm; 18kinds |
Diametric pitch threads |
56-1/4DP; 45kinds |
56-4DP; 24kinds |
Tailstock |
Diameter of quill |
Φ75 mm |
Max. travel of quill |
150 |
Taper of quill |
MT5 mm |
Motors |
Main spindle motor |
7.5 kW |
Rapid traverse motor power |
0.3 kW |
Coolant pump motor |
0.12 kW |
Others |
L x W x H (of lathe) |
1000mm: 2382x975x1450 mm
1500mm: 2632x975x1450 mm
2000mm: 3632x975x1450 mm
3000mm: 4632x975x1450 mm |
Net weight |
2050/2100/2300/2500/2900 kg |
Equipment
Item 01 |
Descriptions |
|
01.01 |
3-jaw Chuck |
|
01.02 |
4-jaw Chuck |
|
01.03 |
Steady rest |
|
01.04 |
Follow rest |
|
01.05 |
Face plate |
|
01.06 |
4-way tool post |
|
01.07 |
Foot brake |
|
01.08 |
Full length splash guard (short type on 3m lathe) |
|
01.09 |
Work lamp |
|
01.10 |
Longitudinal mechanical stop (without on 3m lathe) |
|
01.11 |
Chuck guard |
|
01.12 |
Tool post guard |
|
Optional
Item 02 |
Descriptions |
|
02.01 |
Taper Turning Attachment |
|
02.02 |
Thread chasing dial |
|
02.03 |
Quick Change tool post |
|
02.04 |
2-axis or 3-axis DRO |
|
02.05 |
Live center |
|
02.06 |
Leadscrew guard |
|
Features
Can perform internal and external turning, taper turning, end facing, and other rotary parts turning;
Threading Inch, Metric, Module and D.P.;
Perform drilling, boring and groove broaching;
Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters;
Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries;
There are hand brake and foot brake for users to choose;
These series lathes operate on power supply of different voltages (220V/380V/420V) and different frequencies (50Hz/60Hz).