Features
NC630D Flat Bed CNC Lathe Machine equipments with FANUC 0i TF, Inverter Control Spindle motor, Geared headstock, automatic speed changes, Concentrated Lubrication Device (Can be controlled by Programs), Headstock Independent Lubricate System, Machine Light, Coolant System, 3-Jaw Chuck, Vertical 4-Station Electric Turret, Door interlock. Maximum Turning Diameter 630mm, Swing Over Cross Slide 320mm, Maximum workpiece length 1000/1500/2000/3000/4000/5000mm.
Specifications
Item |
NC630D |
Capacity |
Metric |
X-axis Travel |
320mm |
Z-axis Travel |
785/1245/1845/2745/3745/4745mm |
Swing Over Bed |
630mm |
Swing Over Cross Slide |
320mm |
Maximum Turning Diameter |
630mm |
Maximum workpiece length |
1000/1500/2000/3000/4000/5000mm |
Spindle |
|
Spindle Nose |
C11/D11 |
Spindle Speed Range |
40 – 178 / 71 – 310 / 124 – 556 / 222 - 1000 RPM |
A.C. Spindle Motor (1 min.) |
11 KW |
Chuck Size |
320mm |
Spindle Bore Diameter |
100mm |
Motion |
|
X-axis Rapid Feed Rate |
4000 mm/Min |
Z-axis Rapid Feed Rate |
8000 mm/Min |
Turret |
|
Number of Stations |
4 station vertical turret |
Index Time (Adjacent) |
2.9 seconds |
Turret Accuracy |
0.008 |
Tool Shank Size |
32x25 |
Tailstock |
|
Dia. of quill |
100 mm |
Quill travel |
240 mm |
Quill taper |
MT.6 |
Machine Dimensions |
|
Overall size L x W x H |
3455/3905/4505/5405/6455/7535mm x 2020 x 1805mm |
Net weight |
4800/5100/5600/5900/7100/8100kg |
Equipments
Item 01 |
Descriptions |
|
01.01 |
FANUC 0i TF |
|
01.02 |
Inverter Control Spindle motor |
|
01.03 |
Geared headstock, automatic speed changes |
|
01.04 |
Concentrated Lubrication Device (Can be controlled by Programs) |
|
01.05 |
Headstock Independent Lubricate System |
|
01.06 |
Machine Light |
|
01.07 |
Coolant System |
|
01.08 |
3-Jaw Chuck |
|
01.09 |
Tool Kit |
|
01.10 |
Oil Gun |
|
01.11 |
90 Degree Movable Control Console |
|
01.12 |
Operation manual |
|
01.13 |
Vertical 4-Station Electric Turret |
|
01.14 |
Door interlock |
|
Optionals
Item 02 |
Descriptions |
|
02.01 |
6-station turret |
|
02.02 |
8-station turret |
|
02.03 |
12” hydraulic chuck(thru-hole) |
|
04.04 |
Hydraulic tailstock |
|
02.05 |
Hydraulic station, needed for both hydraulic chuck and hydraulic tailstock or each of them |
|
02.06 |
Steady rest 20~170mm |
|
02.07 |
Steady rest 160~350mm |
|
02.08 |
Live center M6 |
|
02.09 |
Anti-vibration pads (1 set) |
|