Technical parameters of FP-500STY 45° Turning Center Frame
| Model |
Unit |
FP-500STY |
| Working range |
Max. turning diameter over bed |
mm |
Φ680 |
| Max. turning swing dia. over carriage |
mm |
Φ380 |
| Max. turning diameter |
mm |
Φ250 |
| Max. length between both chucks |
mm |
560 |
580 |
| Max. processing length |
mm |
540 |
560 |
| Max. X/Z axis travel |
X2/ X4 axis |
mm |
230/160 |
| Y2 axis |
mm |
120 |
| Z2/ Z4 axis |
mm |
570/570 |
| Max. tailstock travel |
mm |
570 |
| Feed screw |
Control axis |
mm |
8 Axis
(X2+X4+Y2+Z2+Z4+Z5+C1+C2) |
| X2/ X4 axis ball-screw |
mm |
3210-C3 |
| Recommend the X axis motor torque |
Nm |
≥10 |
| Y2 axis ball-screw |
|
3208-C3 |
| Recommend the Y axis motor torque |
Nm |
≥10 |
| Z2/ Z4 axis ball-screw |
|
4010-C3 |
| Recommend the Z axis motor torque |
Nm |
≥15 |
| Z5 axis ball-screw |
|
4010-C3 |
| Recommend the Z5 axis motor torque |
Nm |
≥15 |
| Bed |
Bed slant angle |
|
45° |
| Linear guide’s span |
mm |
400 |
| Spindle |
Max. Spindle speed |
rpm |
Main spindle: 3000 Sub-spindle: 4500 |
Main spindle: 4500 Sub-spindle: 4500 |
| Spindle through-hole diameter |
mm |
Main spindle: Φ79 Sub-spindle: Φ61 |
Main spindle: Φ61 Sub-spindle: Φ61 |
| Spindle nose size |
mm |
Main spindle: A2-6 (standard) Sub-spindle: A2-6 (standard) |
Main spindle: A2-6 (optional) Sub-spindle: A2-6 (optional) |
| Recommend the spindle motor power |
|
Main spindle: 11 Sub-spindle: 7.5 |
Main spindle: 7.5 Sub-spindle: 7.5 |
| Hydraulic chuck or collet chuck |
|
Main spindle: 10 inch Sub-spindle: 8 inch |
Main spindle: 8 inch Sub-spindle: 8 inch |
Briefs
FP-500STY 45° Inclined bed Turning Center Basic Cast Steel, Cast Iron Base Frame is the key cast iron or cast steel component for the manufacture of swing over bed 500mm Slant bed CNC Turning Center.
Features of FP-500STY 45° Turning Center Frame
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;