Technical parameters of FP-500STRYM 45° Turning and Grinding Center Frame
Model |
Unit |
FP-500STRYM |
Working range |
Max. turning diameter over bed |
mm |
Φ680 |
Max. swing diameter over carriage |
mm |
Φ380 |
Max. turning diameter |
mm |
Φ250 |
Max. length between chuck and tailstock center |
mm |
679 |
Max. Length between both chucks |
mm |
665 |
Max. turning and grinding length |
|
500 |
Max. X/Z axis travel |
X1/X3/ X5 axis |
mm |
230/160/350 |
Y1/y3 axis |
mm |
120/120 |
Z1/ Z3 axis |
mm |
680/680 |
Max. tailstock travel (Z5 axis) |
mm |
680 |
Feed screw |
Control axis |
mm |
11 Axis (X1+X3+X5
+Y1+Y3+Z1+Z3+Z5+C1+C2+C3) |
X1/X3 axis ball-screw |
mm |
3210-C3 |
Recommend the X1/X3 axis motor torque |
Nm |
≥10 |
X5 axis ball-screw |
|
4010-C3 |
Recommend the X5 axis motor torque |
Nm |
≥15 |
Y1/Y3 axis ball-screw |
|
3208-C3 |
Recommend the Y1/Y3 axis motor torque |
Nm |
≥10 |
Z1/Z3/ Z5 axis ball-screw |
|
4010-C3 |
Recommend the Z1/Z3/ Z5 axis motor torque |
Nm |
≥15 |
Bed |
Bed slant angle |
|
45° |
Linear guide’s span |
mm |
400 |
Spindle |
Max. Spindle speed |
rpm |
Main spindle: 4500;
Sub-spindle: 4500 |
Spindle through-hole diameter |
mm |
Main spindle: Φ61;
Sub-spindle: Φ56 |
Spindle nose size |
mm |
Main spindle: A2-6;
Sub-spindle: A2-5 |
Recommend the spindle motor power |
kW |
Main spindle: 7.5;
Sub-spindle: 5.5 |
Hydraulic chuck or collet chuck |
|
Main spindle: 8 inch;
Sub-spindle: 6 inch |
Hydraulic tailstock |
Diameter of tailstock center sleeve |
mm |
Φ60 |
Max. Stroke of tailstock center sleeve |
mm |
200 |
Taper of tailstock center sleeve |
|
MT4 |
Features
1. Spindle unit;
2. Germany INA/ REXROTH linear guide;
3. Taiwan PMI/HIWIN screw;
4. Germany FAG screw bearing;
Usages
FP-500STRYM 45° Inclined bed Turning and Grinding Center Cast Steel, Cast Iron Basic Frame is the key cast iron or cast steel component for the manufacture of swing over bed 500mm Slant bed CNC Turning and Grinding Center.